How do I download the Epson L360 Printer Resetter driver and reset it?

How do I download the Epson L360 Printer Resetter driver and reset it?



Epson L360

Epson L360 is a printer product that is in great demand by home and office users. This printer is one of his 3rd generation Epson L series sold in the world. Epson L360 printers are in great demand due to their reliability, quality, and reliable document printing speed.

However, electronic products have a lifespan that requires attention. A problem commonly found with Epson L360 printers is that the indicator light is always orange and blinking, meaning the printer is not ready to print. process.

So, on this occasion, Utopiccomputers provides a review on how to reset his Epson L360 manually and using software. For more information, let's go directly to the review topic.




How to download and reset Epson L360 Printer Resetter

Before my computer friend downloads her Epson L360 resetter and resets the printer, there are a few things I need to check first. This is done to find the main issue that is causing the error on the Epson L360 printer. The problem may be that the Epson L360 does not need to be reset. Here are some of the things you should check:

Before resetting the Epson L360 printer, check the ink to make sure it is not out of ink. If you run out of ink, you can refill your Epson L360 printer.

Check the printer cartridge to make sure it is installed properly and is clean. If your computer friend finds dirt on the cartridge, clean it immediately. Dirty cartridges are not detected and are usually marked with a blink.

Check the printer rollers and make sure there is no paper stuck in his Epson L360 printer rollers you have. The presence of jammed paper also causes the printer to flash,

Please check the USB cable. Before we practice how to reset this girlfriend's Epson L360 printer, we should also check the condition of the USB cable that connects the computer to the printer.

If your computer confirms the above is safe and your girlfriend's Epson L360 printer is still giving errors, your computer friend needs to reset her Epson L360 printer. I have. This method is intended to remove the data stored on the Epson L360 chip and restore the printer to its original state when you first purchased it.

  • First, you need to download the Epson L360 Resetter on your computer. First, click the download button below.
  • Turn on your Epson L360 printer and connect it to your laptop or computer.
  • Then use the Winrar application to extract her downloaded Epson L360 printer resetter software.
  • Run the Epson Adjustment Program application. On the first screen, you will see a Specific Adjustment Mode button. Click the button.
  • Then select your printer model to continue. For this step, select the "L360" model and select "Auto Select" for the port. Click the OK button to continue.
  • After your computer friend has done the above, you can select "Waste Ink Pad Counter" in the program menu list to continue. Then click the OK button.
  • Then you will be guided to a display like the image below. For this step, just check the "Main Pad Counter". Click the "Check" button
  • The "Weste Ink Pad Counter" display is still visible and the "Main pad counter" checklist is still checked. Click the "Initialize" button. After a while, you will see a command to confirm the printer. Turn off the printer and click the program's OK button.
  • Then you can turn on your Epson L360 printer. If successful, the indicator light will be green. Indicates that the printer is ready for use. If it doesn't work, start the process over. Make sure everything is installed correctly.
The method above is how to reset her Epson L360 printer using software. If this is difficult, using manual methods he can reset the Epson L360 printer. Here are the steps:

  • Make sure the printer is turned off and unplug the power cord for about 3-5 minutes.
  • Then plug the power cable into the socket and wait until the printer is fully lit.
  • Press and hold the Resume button for 5 minutes, then release. If you don't know where the button is, look for the button with the ink logo.
  • Press and hold the Resume button for about 3 minutes. release.
  • After that, his Epson L360 printer you have will reset automatically. Please be patient while the reset process completes.
  • If successful, the indicator light turns green, indicating the printer is ready for use.

This is a review of how to reset the Epson L360. I hope the above review is helpful to my computer buddies everywhere. Don't forget to share this article on your social media accounts. That way, you can share useful knowledge.

Developer: Seiko Epson | OS: Windows 7,8,10,11 | License: Freeware | Size: 2MB




Post a Comment

Previous Post Next Post

Comments

Morasoftpedia 2